Kit de bricolaje de enseñanza y capacitación electrónica de osciloscopio Skip to content
Enjoy FREE SHIPPING WORLDWIDE & EASY RETURNS!
Enjoy FREE SHIPPING WORLDWIDE & EASY RETURNS!

Oscilloscope electronic teaching and training DIY kit

Original price €102,95 - Original price €102,95
Original price
€102,95
€102,95 - €102,95
Current price €102,95
Availability:
in stock, ready to ship

The shell oscilloscope is powered by 9V DC (the supply voltage should not exceed 10V! Otherwise it may burn the device). The kit itself does not contain a power supply. Users need to prepare the power supply by themselves, and the current of the power supply should be able to supply more than 200mA.
Characteristic index:
The highest real-time sampling rate: 1Msps
Precision: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 5mV/Div - 20V/Div (in 1-2-5 manner)
Adjustable vertical shift, with instructions
Input impedance: 1MΩ
Maximum Input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling methods: DC/AC/GND
Horizontal time base range: 10μs/Div - 50s/Div (increase by 1-2-5)
With automatic, conventional and single trigger modes, it is convenient to capture instant waveforms
Can be triggered by rising or falling edge
Trigger level position is adjustable, with display
Observe the waveform before the trigger (negative delay)
The waveform display can be frozen at any time (HOLD function)
With 1KHz /3.3V square wave as test signal source
With digital display of the waveform parameters, the following parameters can be displayed: frequency, period, Pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, RMS value
Save/recall the waveform, the waveform does not disappear when power off
Packing list:

15001K (SMD components have been welded ):
All parts of the cup oscilloscope, the chip components of the analog board have been welded and tested
BNC fish clip probe
Assembly instructions

Free Shipping Worldwide

More information about shipping

30 day return policy - quick and easy

More information about returns and exchanges

Flexible and secure payment methods

Further information about payment methods

Beschreibung

The shell oscilloscope is powered by 9V DC (the supply voltage should not exceed 10V! Otherwise it may burn the device). The kit itself does not contain a power supply. Users need to prepare the power supply by themselves, and the current of the power supply should be able to supply more than 200mA.
Characteristic index:
The highest real-time sampling rate: 1Msps
Precision: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 5mV/Div - 20V/Div (in 1-2-5 manner)
Adjustable vertical shift, with instructions
Input impedance: 1MΩ
Maximum Input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling methods: DC/AC/GND
Horizontal time base range: 10μs/Div - 50s/Div (increase by 1-2-5)
With automatic, conventional and single trigger modes, it is convenient to capture instant waveforms
Can be triggered by rising or falling edge
Trigger level position is adjustable, with display
Observe the waveform before the trigger (negative delay)
The waveform display can be frozen at any time (HOLD function)
With 1KHz /3.3V square wave as test signal source
With digital display of the waveform parameters, the following parameters can be displayed: frequency, period, Pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, RMS value
Save/recall the waveform, the waveform does not disappear when power off
Packing list:

15001K (SMD components have been welded ):
All parts of the cup oscilloscope, the chip components of the analog board have been welded and tested
BNC fish clip probe
Assembly instructions

Shipment

Free shipping worldwide

More information about shipping

Request a quote or ask a question

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

compare products

{"one"=>"Wählen Sie 2 oder 3 Artikel zum Vergleichen aus", "other"=>"{{ count }} von 3 Elementen ausgewählt"}

Wählen Sie das erste zu vergleichende Element aus

Wählen Sie das zweite zu vergleichende Element aus

Wählen Sie das dritte Element zum Vergleichen aus

Compare
Beschreibung

The shell oscilloscope is powered by 9V DC (the supply voltage should not exceed 10V! Otherwise it may burn the device). The kit itself does not contain a power supply. Users need to prepare the power supply by themselves, and the current of the power supply should be able to supply more than 200mA.
Characteristic index:
The highest real-time sampling rate: 1Msps
Precision: 12Bit
Sampling buffer depth: 1024 bytes
Analog bandwidth: 0-200KHz
Vertical sensitivity: 5mV/Div - 20V/Div (in 1-2-5 manner)
Adjustable vertical shift, with instructions
Input impedance: 1MΩ
Maximum Input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
Coupling methods: DC/AC/GND
Horizontal time base range: 10μs/Div - 50s/Div (increase by 1-2-5)
With automatic, conventional and single trigger modes, it is convenient to capture instant waveforms
Can be triggered by rising or falling edge
Trigger level position is adjustable, with display
Observe the waveform before the trigger (negative delay)
The waveform display can be frozen at any time (HOLD function)
With 1KHz /3.3V square wave as test signal source
With digital display of the waveform parameters, the following parameters can be displayed: frequency, period, Pulse width, duty cycle, maximum value, minimum value, average value, peak-to-peak value, RMS value
Save/recall the waveform, the waveform does not disappear when power off
Packing list:

15001K (SMD components have been welded ):
All parts of the cup oscilloscope, the chip components of the analog board have been welded and tested
BNC fish clip probe
Assembly instructions